[F6BLED] LED CONVERSION LIGHT KIT

$155.00
29 reviews Write a Review
SKU:
F6BLED
Shipping:
Calculated at Checkout

[F6B] F6BLED FRONT/REAR CONVERSION LIGHT KIT

Increase your visibility to other drivers/riders, lower the electric load on your alternator and battery, and increase the life span of your lights.
PATHFINDERLED bulbs are extremely bright. The pictures do not do this product justice.
You have to see them for yourself and you'll be amazed how bright they are…Guaranteed!

Our NEW EXTREME BRIGHT LED BULBS will replace the Rear/Front stock bulbs to LEDs on your F6B. The Kit options include the Running/Brakes, Trunk, Front and/or the Rear Turn Signals.

Unmatched quality and performance, these bulbs are as bright as they come and barely draw any power off your battery, less than 1amp. We've tested and powered this bulb off a 9volt battery. Unlike cheap wedge LED bulbs that don't offer any real brightness over your stock bulbs, these bulbs differ because they not only are TWICE as bright; they barely use any power from your battery. These bulbs are direct replacement Plug N Play and are simple to install. Upgrade today so you can be safe and be seen!

These are High Quality "Instant Intensity" LED bulbs unlike cheap ones found on the internet. Our LED bulbs are much more efficient and will reduce the load on your bike’s charging system. If you've tried other LED bulbs before and were disappointed, we guarantee you will be very happy with these. The reviews speak for themselves!

FEATURES:

  • Extreme Bright LEDs
  • Instant intensity LEDs
  • Plug N Play - easy installation

POWER: Draws less than 1amp per LED bulb (0.6amp)
BRIGHTNESS: Depending on bulb color about 300-550lm - 360 Degrees
FITMENT: HONDA F6B

NOTE: OPTIONAL LED FLASHER - The use of the LED Flasher is to normalize your blinker rate otherwise they would flash rapidly after replacing your stock bulbs to LED bulbs. Only 1 flasher is needed for both the front and rear turn signals. The LED Flasher is optional because some may already have an LED Flasher previously purchased, or it is included in another product purchased.


2 OPTIONS AVAILABLE: COMPLETE LED KIT

This "COMPLETE LED PACKAGE" will replace your rear running/brake lights, rear turns signals and front turn signals to LEDs.

[P/N: F6BLED] COMPLETE FRONT & REAR LED KIT INCLUDES:

  • QTY : 2pcs - REAR SIGNAL LIGHTS (AMBER)
  • QTY : 2pcs - FRONT SIGNAL LIGHTS (AMBER)
  • QTY : 2pcs - RUNNING/BRAKE LIGHTS (RED)
  • QTY :1pc - LED FLASHER [GL88T1]:
    The use of the LED Flasher is to normalize your blinker rate otherwise they would flash rapidly after replacing your stock bulbs to LED bulbs.
    Save off the LED Flasher when purchased in this kit!

[P/N: F6BCNF] COMPLETE FRONT & REAR LED KIT [NO FLASHER] INCLUDES:

  • QTY : 2pcs - REAR SIGNAL LIGHTS (AMBER)
  • QTY : 2pcs - FRONT SIGNAL LIGHTS (AMBER)
  • QTY : 2pcs - RUNNING/BRAKE LIGHTS (RED)
  • The use of the LED Flasher is to normalize your blinker rate otherwise they would flash rapidly after replacing your stock bulbs to LED bulbs. You would choose this kit if you already have a flasher installed on your bike OR have ordered another product that comes with an LED Flasher. Only 1 flasher is needed per bike.

OPTIONS AVAILABLE: REAR LED KIT
This "
REAR LED PACKAGE" will replace your rear running/brake lights, and rear turns signals to LEDs.

[P/N: F6B00F] REAR ONLY LED KIT INCLUDES:

  • QTY : 2pcs - RUNNING/BRAKE LIGHTS (RED)
  • QTY : 2pcs - REAR SIGNAL LIGHTS (AMBER)
  • QTY : 1pc - LED FLASHER [GL88T1]:
    The use of the LED Flasher is to normalize your blinker rate otherwise they would flash rapidly after replacing your stock bulbs to LED bulbs.
    Save off the LED Flasher when purchased in this kit!

[P/N: F6B0NF] REAR ONLY LED KIT [NO FLASHER] INCLUDES:

  • QTY : 2pcs - REAR SIGNAL LIGHTS (AMBER)
  • QTY : 2pcs - RUNNING/BRAKE LIGHTS (RED)
  • The use of the LED Flasher is to normalize your blinker rate otherwise they would flash rapidly after replacing your stock bulbs to LED bulbs. You would choose this kit if you already have a flasher installed on your bike OR have ordered another product that comes with an LED Flasher. Only 1 flasher is needed per bike.

F6B REAR LEDS IMAGE - COMPARISON OF FACTORY AND PATHERFINDERLED LIGHTS UPGRADE
These are High Quality "Instant Intensity" LED bulbs unlike cheap ones found elsewhere on the internet.
Note: Some items may look slightly different from the actual parts you receive. The product(s) you receive may either be an upgraded, improved or simply a re-designed model compared to product image shown.

 

 

CALIFORNIA residents only:
WARNING: This product contains chemicals including DEHP, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov

FITMENT:
HONDA F6B
INSTALLATION:
PLUG N PLAY
PACKAGE CONTENTS:
SEE PRODUCT DESCRIPTION
PathFinderLEDs are warranted against defects for a period of 1 Year from purchase date, unlike 60 days from other outlets, satisfaction guaranteed. Always verify your bulb type before ordering.

29 Reviews

  • 5
    Big Improvement over Stock

    Posted by Jim on Dec 03, 2014

    These lights are bright! Much better than stock. Easy installation.

  • 5
    THEY ARE BRIGHTER THAN STOCK

    Posted by VP on Aug 31, 2014

    I converted my stock incandescent rear tail and brake lights and replaced them with these red LED bulb. These work perfectly and are brighter than stock. The included video on the website was extremely helpful so I was able to do the conversion myself. However, there was one thing the video didn't mention because the video displayed how to change the rear bulbs on a full GL1800 Goldwing. On a f6B, I had to remove the top trip that covers the key hole above the rear light setup. You may not have to on your F6B, but I had to because the lights would not come out as smoothly as the video displayed. To remove the panel, start from the outer edges (there are finger holes so you can grab them), pull outward, and then there are two grommets in the middle (above the tail light/brake light) that hold the piece in place. Just pull outward, and it's removed.