One of the brightest bulbs available on the Market! Our PATHFINDERLED 1157RP ULTRA FLASH LED bulb replaces your stock bulbs to LEDs. Plug N Play.
New! PathFinderLED® Ultra-Flash High-Intensity LED Bulbs – Seconds Do Count!
New ultra-flash feature emits a series of quick flashes when your brakes are applied and may help reduce rear end collisions. No complicated modulator to buy or wire splicing!
According to the National Highway Traffic Safety Administration (NHTSA 2010), 90% of rear-end accidents caused by delay in driver recognition could be prevented if the driver becomes aware of the situation just one second earlier.
Designed to increase visibility! PATHFINDERLED® bulbs are known to be one of the brightest with “instant intensity” and now have an ultra-flash feature. These new bulbs are used for tail/brake lamps and can cross fit different applications due to the compact design. Not to be confused with other lights on the market that flash sporadically, have illegal number of flashes, or resemble emergency vehicles. This new ultra-flash feature is programmed into the bulb. When braking, the bulbs will emit a series of 4 flashes, and then remains solid until the next time your brakes are applied. This critical feature may help alert motorists/distracted drivers behind you, giving them extra valuable seconds to brake sooner, and possibly avoid rear end collisions.
PathfinderLED bulbs provide optimal lighting with its ultra brightness, rugged design, and proper fitment in stock housings.
- Flashes 4 times when braking then turns solid.
- Ultra-bright Instant-Intensity LED technology.
- 12V low voltage draw, high performance LED.
- Direct replacement from stock bulbs - Plug N Play.
- Solid-state vibration proof/Rugged long lasting design.
- Rugged metal housing design dissipates heat effectively.
NOTE: There is no LED Flasher or Load Equalizer necessary when changing just your running/brake lights.
ARE FLASHING BRAKE LIGHTS TECHNICALLY "LEGAL"?
Most (if not all) State motorcycle handbooks recommend that you pump your brakes to flash your brakes to increase rear end visibility while coming to a stop. Our bulbs automates this recommendation for you while you're stopping. They automatically facilitate compliance with these State handbooks, and enhance safety and rear end visibility.
As always,check your local state laws as the use of Blinking Brake Lights may vary from one state to another. California having one of the strictest vehicle state codes, our lights are in full compliance: The code states blinking brake lights can flash 4 times within 4 seconds.
UNMATCHED QUALITY AND PERFORMANCE
These are High Quality "Instant Intensity" LED bulbs unlike cheap ones found elsewhere on the internet. LED bulbs are much more efficient and will reduce the load on your bike’s charging system. If you've tried other LED bulbs before and were disappointed, we guarantee you will be very happy with these. The reviews speak for themselves!
For CALIFORNIA residents only: WARNING: This product contains chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov
- 1157 BULB FOR RUNNING/BRAKE LIGHTS FOR HARLEY
- PLUG N PLAY
- PACKAGE CONTENTS:
- (1) LED BULB
- POWER DRAW:
- Less than 1amp per LED bulb 0.6amps
- Depending on bulb color about 300-550lm - 360 Degrees
- ULTRA FLASH - Flashes when braking
Be safe, be seen!
Excellent quality and very bright. Got burned in the past by other cheap LED brake lights that literally went up in smoke within seconds and nearly ruined my brake light housing. These have been working perfectly for a over a month. Would buy again.
Since I've been run over at a Since I've been run over at a stoplight, safety is there first issue and this light is an attention getter.
Red led light
Red light flashing light work very well in my old 82 Goldwing.